你好。
Hello.

在本教程中，我们将学习上升沿以及以下年龄函数，这对边缘检测意味着什么？
In this tutorial, we will learn rising edge and also following age functions, what does that means with the edge detection?

您会看到您是否痒或 TR 痒意味着我们已经与 LDP 或 LDA 等进行了合作。
You will see if you are itchy or are TR itchy means we've already worked with the, for example, LDP or LDA.

自民党是什么？
What was the LDP?

这就是接触类型上升的年龄限制，好吗？
And this is the contact type rising age restriction, OK?

这就是位逻辑。
And this is the bit logic.

但。
But.

根据我们可以使用的，例如LDM 20，在这里我们可以使用我们的指令。
According to the we can use, for example, LDM 20 and in here we can use our instruction.

好的，这是一个函数，它需要将这个想要听到的时钟放在来自目标尝试的时钟脉冲之后。
OK, this is a function and it needs to put this want to hear the clock past the clock pulse is going to come from the aim trying.

好吧，我是。
OK, I'm.

连接它和输出，我会在这里说，就在这里，说我21岁，好吧，又是自民党或奥迪，继续达美航空。
Connecting it and output, I will just say to here, it's right here, said I'm 21, OK, and LDP or Audi again, just continue with Delta.

我22岁了。
I am 22.

这里我们可以使用F3。
And here we can use F3.

这是LDS类型。
This is the LDS type.

好的，我会把它剪掉，现在我们可以将它连接到时钟、脉冲和输出。
OK, I will cut it, and now we can connect it to clock, pulse and output.

我们可以重新设定目标。
We can reset aim.

21。

Twenty one.

好的，棒极了。
OK, very good.

那么会发生什么，我们做了什么？
So what will happen, what we did?

我们已经知道在与自民党的接触中如何使用这一点？
We already learned how can we use this one in the contact we with the LDP?

所有的 f，但我们也可以使用这些技巧和 F3。
All the f, but we can use also these are trick and F3.

好的。
OK.

为什么？
Why?

因为，嗯，我们需要在下一个故事中占据一个特殊的位置。
Because, um, we need a special place in the next story.

当特殊继电器使用我们需要这些功能已经进入程序时，我将讨论它们。
I will talk about them when the special relays are using a we need these functions already into program.

这取决于你，好吗？
It is up to you, OK?

你也可以使用这个。
You can use this too.

但它是如何运行的，您现在将在时钟脉冲处于活动状态时看到。
But how it is running, you will see now when the clock pulse is active.

然后，当 M20 处于活动状态时，它可以始终打开或打开和关闭。
Then, while M20 is active, this can be always on or on and off.

只要一个时钟就没关系。
It doesn't matter just one clock.

它将给出一个输出，只有一个脉冲。
It will give an output, just one pulse.

好的，让我们插入一个 22 个观察窗口，同时也旨在插入 M20 现在打开的观察窗口。
OK, let us insert a twenty two watch window and also aim to insert the watch window M20 is on now.

然后您将看到我们有输出并且 M20 现在已关闭。
Then you will see we have an output and M20 is off now.

然后我们仍然有一个输出。
Then still we have an output.

我们设置它。
We set it.

另外，您还可以看到 的输出。
Also, you can see output of the.

功能障碍是的。
Of dysfunction is of.

你可以勾选这个框，好吗？
You can check this box, OK?

多伦多永远在线。
Toronto is always on.

好的，只有一个。
OK, just one.

看看这个游戏和输出，你会发现这不是活动的，因为为什么只有一个脉冲？
Look this game and output, you will see this is not active because of why just one pulse?

但对于 Iffrig，我将使用 M22，我将使其激活此活动。
But for the Iffrig, I will M22, I will make it activated this active.

但它不会重置，因为您会看到它。
But it is not reset because of you will see it.

没有输出。
There is no output.

仍然为什么需要在这个条件之上。
Still why this condition needs to be on top of.

现在我们已经有条件了。
Now we are on condition.

我现在就去完成它。
I will make it off now.

好的，只是想将其传递给右侧，然后将其重置。
OK, just want pass it along to pass powerful off to the right side and it is reset.

所以这就像现场自民党一样运行，我正在努力让它断断续续，并在断断续续的情况下进行。
So this is running like live LDP and I'm trying to I will make it on and off and live on and off condition.

已重置。
It is reset.

OK，这个我们该怎么用呢？
OK, this is how can we use?

阿蒂尔，痒痒痒，我们的扳机和扳机上升和下降每个功能都为三菱提供紧急情况，好吗？
Artier, itchy and itchy and our trigger and trigger rising and falling each functions into emergency for the Mitsubishi, OK?

本教程到这里就结束了。
For this tutorial, I'm finished here.

额外三人组见。
See you into an extra trio.